TJS- Nut Machine Series sanyi kai inji
Babban sigogi na fasaha:
MISALI | naúrar | Saukewa: TJS-8B-80 | Saukewa: TJS-10BS | Saukewa: TJS-10BL | Saukewa: TJS-11B | Saukewa: TJS-14B |
Stones Qunty | A'a. | 6 | 6 | 6 | 6 | 6 |
Ƙarfafa Ƙarfi | Kgs | 15000 | 23000 | 23000 | 50000 | 80000 |
Max. Yanke Diamita | mm | F6 | F8 | F8 | F9 | F12 |
Max. Yanke- - kashe L tsayi | mm | 25 | 40 | 50 | 40 | 60 |
Producton Spedpcs | PC/min | 60-210 | 60-210 | 60-210 | 30-160 | 50-160 |
P.KO bugun jini | mm |
|
|
| 13 | 15 |
KO bugun jini | mm | 30 | 50 | 80 | 40 | 45 |
bugun jini | mm | 80 | 80 | 110 | 100 | 140 |
Yanke Diamita | mm | Φ28*50L | Φ19*40L | Φ19*40L | Φ25*50L | Φ35*60L |
Punch Diamita | mm | Φ20*70L | Φ31*80L | Φ31*80L | Φ35*95L | Φ40*130L |
Main Die Diamita | mm | Φ35*80L | Φ46*100L | Φ46*100L | Φ46*100L | Φ56*120L |
Mutuwa Pitch | mm | 38 | 53 | 53 | 53 | 60 |
Al'ada Sina na Bolt | mm | Φ2-Φ7 | Φ3-Φ8 | Φ3-Φ8 | Daidaitaccen goro tare da 12mm a fadin bangarorin | Daidaitaccen goro tare da 12mm a fadin bangarorin |
Tsawon Shank na Blank | mm | 2-20 | 30 | 45 | Daidaitaccen tsayi, nau'in bututu 5-25; Nau'in dunƙule 8-35 | Daidaitaccen tsayi, nau'in bututu 5-25; Nau'in dunƙule 8-35 |
Babban Mota | KW | 7.5KW-8 | 11KW-8 | 11KW-8 | 22KW-8 | 45KW-8 |
Babban ƙarfin lantarki | IN | 380V | 380V | 380V | 380V | 380V |
Babban Mitar Motoci | HZ | 75HZ | 75HZ | 75HZ | 75HZ | 75HZ |
Babban Gudun Mota | rpm | 750 | 750 | 750 | 750 | 750 |
Ƙarfin famfo | IN | 2*180W(1/4HP) | 2*180W(1/4HP) | 2*180W(1/4HP) | 2*735W(1HP) | 2*735W(1HP) |
Amfanin mai | L | 100L | 100L | 100L |
| 200L |
girma (L*W*H) | M | 2.6*1.3*1.6 | 2.6*1.3*1.65 | 2.6*1.3*1.65 | 3.1*1.5*1.97 | 3.8*1.7*2.4 |
Nauyi | Ton | 3.5 | 3.6 | 3.6 | 5.5T | 9 |
FAQ
Hanyar aikin injin goro shine kamar haka:
1. Shiri: Shigar da screwdriver bit ko core puller, da kuma tabbatar da cewa wutar lantarki an toshe a ƙasa.
2. Daidaita juzu'i: Daidaita ƙarfin injin kamar yadda ake buƙata, yawanci ta hanyar ƙwanƙwasa ko maɓalli.
3. Fara aikin: Saka dunƙule a cikin goro, daidaita kan dunƙule tare da rami na goro, fara injin, sannan fara ƙara goro.
4. Daidaita kwana: Daidaita kusurwar mashin na goro kamar yadda ake buƙata, yawanci ta ƙwanƙwasa ko maɓalli. Bayan ka matsa kwaya daya, zaku iya daidaita kusurwar da kyau kafin ku kwance na gaba.
5. Kammala aiki: Lokacin da aka ƙara duk goro, kashe wutar injin, tsaftace wurin aiki, cire shugaban sukudiri ko core puller, sannan a adana duka injin.
6. Kulawa: Tsaftace kayan aikin a cikin lokaci bayan amfani da kuma kiyaye waje na injin bushe da tsabta. Duba akai-akai ko injin yana cikin yanayi mai kyau. Idan ya lalace, sai a gyara shi ko a canza shi cikin lokaci.
bayanin 2